Problem solving guide
71
The following fault message appears in the display and the
programme has been cancelled
Message
Possible cause and remedy
Drain fault
Clean the drain filter
and the pump.
Check the drain
hose
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
Clean the filters and the pumps.
The maximum drain height is 1 m.
Water intake fault
Turn on the tap
The water inlet is blocked or restricted.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
Technical fault F
If restart is
unsuccessful, call
Miele.
There is a fault.
Disconnect the washing machine from the mains
electricity supply, either by switching off at the wall
socket and withdrawing the plug, or by
disconnecting it at the circuit breaker.
Wait
at least 2 minutes
before reconnecting the
washing machine to the mains electricity supply.
Then switch the washing machine on again.
Start the programme again.
If the fault message appears again, contact Miele.
Waterproof system
reacted
Turn off the tap. Call
Miele.
The water protection system has reacted.
Turn off the tap.
Call Miele.
To switch off the fault messages: Switch the washing machine off with the
button.
Содержание WMR 861 WPS
Страница 113: ......
Страница 114: ......
Страница 116: ...M Nr 11 007 160 00 en AU NZ WMR 861 WPS ...