Miele WMH122 WPS, Руководство по эксплуатации

Страница: 98 / 104

Settings
98
Water plus level
The water level can be increased in 4
stages by activating the Water plus
option.
Stages:
– Normal (Factory default setting)
– Plus 
– Plus

– Plus 
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy suffer-
ers as it achieves an excellent rinse res-
ult. Water consumption will increase.
Factory default setting: the maximum
rinse level setting is switched off.
Suds cooling
When this is activated, additional wa-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem-
perature of 70 °C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where drainage pipes do not comply
with DIN 1986.
Factory default setting: Suds cooling is
switched off.