Miele WMH122 WPS, Руководство по эксплуатации

Страница: 47 / 104

Programme sequence
47

= Low water level

= Medium water level
 = High water level

= Intensive rhythm
 = Normal rhythm

= Sensitive rhythm

= Ultra sensitive rhythm
 = Handwash rhythm

= Carried out
– = Not carried out
The washing machine has fully elec-
tronic controls with automatic load re-
cognition. It takes in the right amount of
water required for the programme de-
pending on the amount of laundry and
its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme se-
quence display shows which stage of
the programme has been reached.
Special features in the pro-
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the
Woollens and Silks pro-
grammes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, or with
 and  tem-
peratures, 2 rinses are carried out. If a
temperature of less than 60 °C is se-
lected, 3 rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
3)
An additional rinse is carried out if:
– the Water plus option is selected and
the Extra rinse or Water + and Extra
rinse setting has been activated for
the Water plus option in
Settings .
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment
 .
5)
An additional rinse is carried out if:
the
Water plus option is selected.