Miele wda 201 Скачать руководство пользователя страница 9

Страница: 9 / 72

Warning and Safety instructions



The machine must be isolated from the electricity supply when

cleaning and maintaining the machine and in the event of a fault.



The Miele "Water protection system" protects from water damage

provided the following conditions are met:

– the machine is correctly plumbed in and connected to the electri-

city supply.

– if a fault or damage has been identified, the machine must be ex-

amined by a competent person before further use, and repaired if
necessary.



The water flow pressure must be at least 100 kPa and should not

exceed 1000 kPa.



In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.



The machine must not be used in a non-stationary location (e.g.

on a ship).



Do not make any alterations to the machine, unless authorised to

do so by Miele.

Содержание wda 201









































































Результаты поиска

Содержание wda 201

Отзывы:

Похожие инструкции для wda 201

Бренды по названию

Популярные бренды

Miele wda 201, Руководство по эксплуатации

Результаты поиска

Содержание wda 201

Отзывы:

Похожие инструкции для wda 201

Бренды по названию

Популярные бренды