Problem solving guide
42
The wash programme stops and a fault indicator light comes on.
Problem
Cause and remedy
The
Check drainage
fault indicator light
flashes and a fault num-
ber appears in the dis-
play.
The water outlet is blocked.
Clean the drain filter and the drain pump as de-
scribed in "Problem solving guide – Opening the
drum door in the event of a blocked water outlet
and/or a power failure".
The drain hose has been fixed too high.
The maximum delivery head is 1 m.
The
Check inlet
fault in-
dicator light flashes and
a fault number appears
in the display.
The water inlet is blocked.
Open the stopcock.
The filter in the water inlet hose is dirty.
Clean the filter.
The
Check inlet
and
Check drainage
fault in-
dicator lights flash and
a fault number appears
in the display.
The water protection system has reacted.
Close the stopcock.
Call the Miele Service Department.
The
Soak/Pre-wash
or
Rinses
flash and a fault
number appears in the
display.
There is a fault.
Start the programme again. If the fault indicator
comes on again, call the Miele Service Depart-
ment.
To switch off the fault indicator: Switch the washing machine off with the
button
and turn the programme selector to
Finish
.
Содержание wda 201
Страница 70: ......
Страница 72: ...M Nr 10 201 000 01 en GB WDA 201 WPM ...