Miele wda 201 Скачать руководство пользователя страница 43

Страница: 43 / 72

Problem solving guide

A check or fault indicator light comes on but the wash
programme continues as normal.

Problem

Cause and remedy

The

Hygiene info

check

indicator light comes
on.

A programme using a temperature above 60°C has
not been run for a long time.



In order to prevent bacteria and unpleasant odours
building up in the machine, run the

Cottons 90°C

using powder detergent.

The

Check dosage

check indicator light
comes on.

Excessive foam has built up during washing.



Use less detergent next time, and follow the man-
ufacturer's recommended dosage amounts on the
packaging.

The

Main wash

Rinses

indicator lights

flash in the programme
sequence display and a
fault number appears in
the display.

The washing machine has detected a fault during the
wash programme.



Start the programme again. If the fault indicator
comes on again, call the Miele Service Depart-
ment.

The

Anti-crease/Finish

indicator light flashes in
the programme se-
quence display.

The programme selector was moved to another posi-
tion after the programme had started.



Turn the programme selector back to the original
position.

To switch off the fault indicator: Switch the washing machine off with the



button

and turn the programme selector to

Finish

The check indicator lights come on at the end of a programme and when the
washing machine is switched on.

Содержание wda 201









































































Результаты поиска

Содержание wda 201

Отзывы:

Похожие инструкции для wda 201

Бренды по названию

Популярные бренды

Miele wda 201, Руководство по эксплуатации

Результаты поиска

Содержание wda 201

Отзывы:

Похожие инструкции для wda 201

Бренды по названию

Популярные бренды