Problem solving guide
65
Fluff filter in the condensed
water container
If you are experiencing problems
running the
Steam smoothing
programme, the fluff filter at the end
of the hose which is connected to
the rubber seal in the condensed
water container could be blocked.
Pull out the condensed water
container.
Remove the spout by holding the
side lug and pulling upwards.
To avoid detaching the hose be
careful not to tug on it.
Guide the end of the hose through
the opening and hold it securely with
one hand.
Use your other hand to pull the fluff
filter off the hose.
Rinse the fluff filter with a jet of water
until all the fluff has been removed.
Refit the cleaned fluff filter onto the
hose.
Now feed the hose with its fluff filter
attached into the condensed water
container.
Replace the spout in the condensed
water container. Make sure it is the
correct way round (see the
illustration).