Changing the programme sequence
45
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you move the programme selector,
Programme cannot be changed
will
light up in the display until you move
the programme selector back to the
original programme.
You will need to cancel the current
programme before you can select a
new one.
Once a programme has
started ...
... cancelling the programme and
then selecting a new programme
Press the
Start/Stop
button.
Confirm
Cancel programme
with the
OK
sensor.
–
Cooling down
will light up in the
display, depending on the drying
duration and the drying temperature
reached.
– Wait until
Finish
lights up in the
display or press the
Start/Stop
button again until
Finish
lights up.
Press the
button to switch the
dryer off.
Press the
button to switch the
dryer on.
Select and start a new programme
straight away.
... saving the programme as a
favourite
Press the
Start/Stop
button.
Select and confirm
Save programme
.
You can save this programme under
Favourites
. See "Favourites, 2. Entering
a name".
Adding or removing laundry
after a programme has started
Press the
Start/Stop
button.
Select
Cancel programme
.
Confirm by touching the
OK
sensor.
–
Cooling down
will light up in the
display, depending on the drying
duration and the drying temperature
reached.
– Wait until
Finish
lights up in the
display or press the
Start/Stop
button again until
Finish
lights up.
Danger of burning.
Do not touch the back of the drum
when adding or removing items. The
drum and the items can be very hot.
Add or remove items.
Close the door.
To continue with the programme:
(change the drying level first of all, if
necessary)
Press the
Start/Stop
button.
Programme duration
Altering the programme sequence can
cause the programme duration shown
in the display to be adjusted.