Problem solving guide
51
Problem solving guide
With the help of the following notes minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting Miele.
Please note that a call-out charge will be applied to service visits where the
problem could have been rectified as described in these operating instructions.
Repair work to electrical appliances should only be carried out by an
authorised Miele service technician. Repairs and other work by unqualified
persons could be dangerous. Miele cannot be held liable for unauthorised
work.
Some of the messages in the display are more than one line long. Touch the
or
sensor to read them in full.
Messages in the display
Problem
Possible cause and remedy
lights up after
switching on
Access via a code has been activated.
See "Settings menu - PIN Code".
Adjust load See
lights up after a
programme is cancelled
This is not a fault.
In some programmes, if the drum has been
underloaded or is empty, the programme will be
cancelled. This can also happen if the items are
already dry.
Open and close the door to resume drying.
Use the
Warm air
programme (timed drying) to dry
individual items.
Call service Fault F
lights up after a
programme is cancelled
There is no obvious cause.
Switch the dryer off and then on again.
Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact Miele.
Содержание TKG 450 WP
Страница 80: ...M Nr 09 778 120 01 en AU NZ TKG 450 WP ...