Before using for the first time
20
Removing the protective foil
and stickers
Please remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
After installing the tumble
dryer
Before using the tumble dryer for
the first time, ensure that it is
installed and connected to the
electricity supply correctly. If it has
not been transported as described in
"Installation and connection", then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
When the tumble dryer is switched on,
the welcome display
Miele Willkommen
will appear briefly.
Setting the language
You will be asked to select the
language you want for the display. It is
possible to change the language at any
time via
Settings
.
deutsch
You can scroll through the list by
touching the
and
sensors until
the language you want is highlighted
in the display.
The
arrows in the display indicate
that further options are available.
Confirm your choice of language by
touching the
OK
sensor.
Completing the procedure for
using for the first time outlined
in these instructions
See
Confirm by touching the
OK
sensor.
Read "1. Notes on correct laundry
care" and "2. Loading the tumble
dryer".
You can then load the tumble dryer
and select a programme as
described in "3. Selecting and
starting a programme".
The procedure for using for the first
time is completed when a programme
lasting longer than one hour has been
carried out in full.
Содержание TKG 450 WP
Страница 80: ...M Nr 09 778 120 01 en AU NZ TKG 450 WP ...