Installation
44
Preparing the worktop
Create the worktop cut-out.
Remember to maintain the minimum
safety distances (see “Safety
distances”).
Seal the cut surfaces of
wooden
worktops
with a suitable heat-
resistant sealant to avoid swelling
caused by moisture. The sealant
must be temperature-resistant.
Make sure the sealant does not
come into contact with the top
surface of the worktop.
Flush-fit installation
For wooden worktops, secure the
wooden frames 5.5 mm below the
upper edge of the worktop.
For CS 7611 FL, the wooden frame
must be secured 7 mm under the
upper edge of the worktop.
