Worktop cut-out for flush-fit installation
38
B
A
524
50
0
+1
+1
ß
R 4
B
A
0
2
12
0
10
5,5
+0,5
0
2
B
A
12
0
10
5,5
+0,5
Natural stone worktop
Wooden worktop
Information for calculating the cut-out
The SmartLine appliances overlap the worktop by 10 mm.
When installing several SmartLine appliances, a distance of 2 mm must be
observed between the individual SmartLine appliances.
Calculating cut-out dimension
A
1 SmartLine appliance = width of the appliances plus 2 mm on the right, plus
2 mm on the left.
Several SmartLine appliances = total width of the appliances plus 2 mm distance
between the SmartLine appliances, plus 2 mm on the right, plus 2 mm on the left.
Calculating cut-out dimension
B
= cut-out dimension A minus 12 mm on the right,
minus 12 mm on the left.
Some examples are illustrated below.
