manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine CS 7612 FL Скачать руководство пользователя страница 8

Warning and Safety instructions

8

Technical safety

 

Unauthorised installation, maintenance and repairs (including

removal of any cover) can cause considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.

 

Damage to the cooktop can compromise your safety. Check the

appliance for visible signs of damage. Do not use the cooktop if it is
damaged.

 

Temporary or permanent operation with a self-sufficient or non-

mains synchronous energy supply system (e.g. isolated networks,
back-up systems) is possible. A requirement for the operation is that
the energy supply system complies with all current local and national
requirements that apply to stand-alone, solar and/or battery
systems.
The protective measures provided in the domestic installation and in
this Miele product must also be assured in their function and
operation in isolated operation or in non-mains synchronous
operation, or replaced with equivalent measures in the installation.

 

The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing
system which complies with local and national safety regulations. It
is most important that this basic safety requirement is present and
tested regularly and, where there is any doubt, the household wiring
system should be inspected by a qualified electrician.

 

Before connecting the appliance to the mains electricity supply,

ensure that the connection data on the data plate (voltage and
frequency) matches the mains electricity supply. This data must
correspond in order to avoid the risk of damage to the appliance.

 

Do not connect the cooktop to the mains electricity supply by a

multi-socket adapter or extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.

Содержание SmartLine CS 7612 FL

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды