manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine CS 7612 FL Скачать руководство пользователя страница 48

Problem solving guide

48

Problem

Possible cause and remedy



 will flash alternately

with 



, 



 or 



 in

the timer display.

The fan is blocked or defective.

Make sure the fan has not been blocked by an
object.

Remove the obstruction.

If this fault code continues to appear in the
display, contact Miele.

A message not listed in
this table is appearing
in the timer display.

There is an electronic unit fault.

Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.

If the problem persists after power is restored,
please contact Miele.

Unexpected behaviour

Problem

Possible cause and remedy

The power level
selected is flashing.

There is no pan on the cooking zone, or the pan is
unsuitable.

Use suitable pans (see “Induction - Cookware”).

The sensor controls
show increased
sensitivity or fail to
react.

The sensitivity level of the sensor controls has
changed.

Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the
SmartLine appliance. Also ensure the area
surrounding the SmartLine appliance is not too
dark.

Take any pans off the SmartLine appliance and
wipe away any food deposits.
Ensure that there is nothing covering the entire
SmartLine appliance or sensor controls.

Interrupt the power supply to the SmartLine
appliance for approx. 1 minute.

If the problem persists after power is restored,
please contact Miele.

Power level 9 is
automatically reduced if
you also set power
level 9 for the
connected cooking
zone.

Operating both zones at power level 9 exceeds the
permitted maximum power for the two zones.

Use a different cooking zone.

Содержание SmartLine CS 7612 FL

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды