manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine CS 7612 FL Скачать руководство пользователя страница 49

Problem solving guide

49

Problem

Possible cause and remedy

A cooking zone
switches itself off
automatically.

It has been operated for too long.

You can use the cooking zone again by switching
it back on (see “Safety features - Safety switch-
off”).

A cooking zone is not
working in the usual
way on the power level
selected.

The overheating protection mechanism has been
activated.

See “Safety features - Overheating protection”.

A cooking zone or the
whole cooktop switches
off automatically.

The overheating protection mechanism has been
activated.

See “Safety features - Overheating protection”.

The Booster has
automatically switched
off early.

The overheating protection mechanism has been
activated.

See “Safety features - Overheating protection”.

Unsatisfactory results

Problem

Possible cause and remedy

The food in the pan
hardly heats up or does
not heat up at all when
the Auto heat-up
function is switched on.

There is too much food in the pan.

Start cooking at the highest power level and then
turn down to a lower one manually later on.

The pan is not conducting heat properly.

Use a different pan which is better able to conduct
heat.

Содержание SmartLine CS 7612 FL

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды