manualshive.com logo in svg

Miele SmartLine CS 7612 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine CS 7612 FL Скачать руководство пользователя страница 27

Operation

27

Operating principles

This SmartLine appliance is equipped
with electronic sensor controls which
react to finger contact. For safety
reasons, in order to switch the
appliance on, the On/Off 

 sensor

needs to be touched for a little longer
than the other sensors.
Each time you touch a sensor, an
audible tone sounds.

Only the printed On/Off 

 symbol is

visible when the SmartLine appliance is
switched off. The other sensor controls
light up when the SmartLine appliance
is switched on.

Malfunction due to dirty and/or

covered sensor controls.
If the sensor controls are dirty or
covered this could cause them to fail
to react, to activate a function or
even to switch the appliance off
automatically (see “Safety features -
Safety switch-off”). Placing hot pans
on the sensor controls/indicators can
damage the electronic unit
underneath.
Keep the sensor controls and
indicators clean and do not place hot
pans or anything else on top of them.

Содержание SmartLine CS 7612 FL

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды