System settings
66
Press
OK
to confirm the message in the display.
The dispensing quantity measurement is carried out.
The process steps appear in the display, e.g.,
Dispenser pump active
.
Once the measurement is complete, the on-screen keyboard opens.
The previously set value is displayed.
Fill the 500–1000 ml measuring cylinder up to the original fill level
with the process chemical from the 100 ml measuring cylinder.
Read off the required filling volume on the 100 ml measuring cylin-
der.
Enter the read value using the on-screen keyboard and confirm with
OK
.
The measurement results for the conversion factors are displayed,
e.g.:
Conversion factor DOS 1:
old ... µl/Imp new ... µl/Imp
Conversion factor flow sensor 1:
old ... µl/Imp new ... µl/Imp
Accept new values?
The new conversion factors are taken over by the control module with
OK
; pressing
retains the old conversion factors. The
Set up dis-
pensing system
menu reappears in the display.
Contact Miele Technical Service to carry out
Set up dispensing sys-
tem
if the machine dispensing systems are not equipped with suc-
tion wands.
