Miele PLW 8615 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 100

background image

IMPORTANT SAFETY INSTRUCTIONS

19



Risk to health and risk of damage if the operating instructions

are not followed.
Failure to follow the operating instructions – and in particular the
safety instructions and warnings they contain – may result in per-
sons being seriously injured or property being seriously damaged.
Read these operating instructions carefully before using the ma-
chine. This will help prevent the likelihood of both personal injury
and damage to the machine.
Keep these operating instructions in a safe place.

Proper use



Use of the machine is only approved for the applications stated in

the operating instructions. Conversions, modifications, and any other
use are not permitted and could be dangerous.
The cleaning and disinfection processes are only designed for labora-
tory glassware and utensils which are designated as reprocessable
by the manufacturer. The information provided by the manufacturer of
the wash items must be observed.



This machine is intended for indoor use in a stationary location

only.



The machine is equipped with a special lamp to cope with particu-

lar conditions (e.g., temperature, moisture, chemical resistance, abra-
sion resistance, and vibration). This special lamp must only be used
for the purpose for which it is intended. It is not suitable for room
lighting. Replacement bulbs may only be installed by Miele Technical
Service.

Risk of injury

Please pay attention to the following notes to avoid injury.



This machine must be commissioned, serviced and repaired by a

Miele authorized and trained service technician only. To ensure com-
pliance with Good Laboratory Practice guidelines, Miele repair and
maintenance contracts are recommended. Unauthorized repairs can
pose considerable risks to the user.



Do not install the machine in an area where there is any risk of ex-

plosion or of freezing conditions.



The electrical safety of the machine can only be guaranteed when

correctly grounded. It is essential that this standard safety require-
ment is observed and regularly tested. If in any doubt, please have
the electrical installation inspected by a qualified electrician.



A damaged or leaking machine could be dangerous and compro-

mise your safety. Disconnect the machine from the electrical supply
immediately and contact Miele Service.

«
...
17
18
19
20
21
...
»

Содержание PLW 8615





































































































Отзывы:

Нет отзывов

Похожие инструкции для PLW 8615

Бренд: Haier Страницы: 6

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 34

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 11

Бренд: Haier Страницы: 28

Бренд: Haier Страницы: 12

Бренд: Oasser Страницы: 10

DW60A807 Series

Бренд: Samsung Страницы: 420

Бренд: Artusi Страницы: 46

Бренд: Atag Страницы: 184

Бренд: Sammic Страницы: 28

Бренд: CMA Dishmachines Страницы: 58

Бренд: Hotpoint Страницы: 72

Pico Power 7920

Бренд: Hozelock Страницы: 12

Бренд: Washtech Страницы: 12

Бренд: Fisher & Paykel Страницы: 2

Бренд: Rangemaster Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды