Miele PG 8535 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 80

background image

This washer-disinfector complies
with all applicable safety laws and
regulations. However, inappropriate
use can lead to personal injury and
property damage.
Read the operating instructions
carefully before using this
washer-disinfector. This will help
keep you safe and avoid damage to
the washer-disinfector.
Keep these instructions in a safe,
accessible location.

Correct Use

~

This washer-disinfector is not

intended for any purpose that is not
indicated in the operating instructions.
Any other use, including conversions or
modifications, is not permitted and may
be dangerous.
The cleaning and disinfection
processes described here apply only to
those instruments, medical products,
instruments and labware that are
specifically designed by the
manufacturer to be re-used. Always
comply with the product and instrument
manufacturer's instructions.
Miele will not be held liable for damage
caused by incorrect use of any kind.

~

This washer-disinfector is intended

exclusively for stationary use in interior
locations.

To avoid possible injury, please
follow these instructions!

~

This washer-disinfector should only

be installed, maintained, and repaired
by a Miele service technician. For best
compliance with Good Laboratory
Practice guidelines and regulations
governing the use of medical products,
a valid Miele service and repair
contract is recommended. Work
performed by unqualified persons can
place the user at considerable risk of
harm.

~

Do NOT install the

washer-disinfector in an area where the
danger of explosion or freezing may be
present.

~

The electrical safety of this

washer-disinfector can only be
guaranteed when it has been properly
grounded in compliance with
applicable safety regulations. It is
imperative that this basic safety
requirement be met. In case of any
doubt, have the electrical system
checked by a qualified technician.
The manufacturer will not be held liable
for damages resulting from an
inadequate grounding system (for
example, electric shock).

~

A damaged or leaking

washer-disinfector is is a hazard to your
safety. Immediately turn off the
washer-disinfector at the power switch
and contact the Miele Service
Department.

~

Washer-disinfector operators must

be trained on a regular basis. Untrained
personnel must not be allowed access
to the washer-disinfector or its controls.

Safety Instructions and Warnings

6

«
...
4
5
6
7
8
...
»

Содержание PG 8535

















































































Отзывы:

Нет отзывов

Похожие инструкции для PG 8535

Бренд: Tanco Страницы: 72

Бренд: HABYS Страницы: 16

Бренд: Acterna Страницы: 72

Бренд: Laica Страницы: 4

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Бренд: GE Страницы: 14

Бренд: GE Страницы: 11

Бренд: GE Страницы: 20

Druck ADTS 2 Series

Бренд: GE Страницы: 18

Бренд: Canta Страницы: 2

Бренд: Xoop Lighting Страницы: 20

Бренд: Vari Lite Страницы: 132

Бренд: JB Systems Страницы: 12

Бренд: IDEAL Networks Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды