Miele PDR 307 EL CC Скачать руководство пользователя страница 44

Страница: 44 / 84

Problem solving guide

Message

Cause and remedy



Rinse the fluff filter
and the plinth filter.
Check the airways.

lights up after a
programme has
been cancelled.

You have attempted to dry only a few items of vary-
ing size. A smaller item has been sucked into the
loading area in the door and is clogging the holes in
the laundry deflector.



To delete the message: touch the

sensor con-

trol.



Open the tumble dryer door.



Remove the item that is blocking the holes.



Always dry small, individual items together with
larger items.

If you are able to exclude all this, an even more major
problem has occurred. See below.

The system has been clogged by fluff or detergent
residue.



Clean the fluff filter and air channels.



Check the ducting to make sure the drying air can
be extracted without any obstructions.

Please see “Cleaning and care” for notes on clean-
ing. Always replace a damaged fluff filter.



To delete the message: touch the

sensor con-

trol.



Fault F. If restart
fails, call Service.

lights up after a
programme has
been cancelled.

There is no obvious cause.



Note the prompt in the display.



Touch the

sensor control.

If the programme terminates again with the same er-
ror message, then there is a fault. Contact Miele Ser-
vice.



Obstruction detec-
ted. Untangle laun-
dry and restart

lights up after a
programme has
been cancelled.

The laundry is unevenly distributed or has rolled up.



Open the door and loosen the laundry. Take out
some of the laundry if necessary.



Close the door.



Start a programme.

Содержание PDR 307 EL CC





















































































Результаты поиска

Содержание PDR 307 EL CC

Отзывы:

Похожие инструкции для PDR 307 EL CC

Бренды по названию

Популярные бренды

Miele PDR 307 EL CC, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PDR 307 EL CC

Отзывы:

Похожие инструкции для PDR 307 EL CC

Бренды по названию

Популярные бренды