Installation
*INSTALLATION*
31
6
5
Affix edge protection
to the adja-
cent cabinet fronts.
Insert the plug connector at the back
of the wine conditioning unit (see “In-
stallation – Electrical connection”).
Insert the plug
into the electrical
socket.
The electrical socket should be close
to the wine conditioning unit and
easily accessible.
Risk of damage due to electrical
overload.
If the wine conditioning unit is electri-
cally overloaded, this can cause a
short circuit and therefore damage to
your appliance.
When you install appliances side by
side, each appliance must have its
own separate electrical socket.
Tip:
Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
the wine conditioning unit is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Push the wine conditioning unit care-
fully into the installation niche.
If the wine conditioning unit cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear feet slightly (see “In-
stallation – Aligning the wine condi-
tioning unit”) and slide the appliance
into the installation niche.
Remove the edge protection
from
the adjacent cabinet fronts.
