Miele KWT 2601 Vi Скачать руководство пользователя

Страница: 11 / 100

IMPORTANT SAFETY INSTRUCTIONS

Cleaning and maintenance



Do not use any oil or grease on the door seals.

They can cause the seals to deteriorate over time.



Do not use a steam cleaning appliance to clean this wine condi-

tioning unit.
The steam could reach electrical components and cause a short cir-
cuit.



Sharp edged or pointed objects will damage the evaporator, caus-

ing irreversible damage to the wine conditioning unit. Do not use
sharp edged or pointed objects to

– remove frost and ice,

– remove labels, stickers, etc.

Transport



Always transport the wine conditioning unit in an upright position

and in its original transport packaging to avoid damage in transit.



Risk of injury and damage. The wine conditioning unit is very

heavy and must be transported by two people.

Содержание KWT 2601 Vi





































































































Результаты поиска

Содержание KWT 2601 Vi

Отзывы:

Похожие инструкции для KWT 2601 Vi

Бренды по названию

Популярные бренды

Miele KWT 2601 Vi, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWT 2601 Vi

Отзывы:

Похожие инструкции для KWT 2601 Vi

Бренды по названию

Популярные бренды