Miele KWNS 28462 E ed/cs Скачать руководство пользователя страница 18

Страница: 18 / 120

Guide to the appliance

Ice cube maker with integrated
ice cube tray

For the automatic ice-cube maker to
operate, it must be connected to a
mains water supply (see “Mains water
connection”).

The ice-cube maker can be turned off
independently of the refrigeration ap-
pliance if you do not want to make any
ice cubes.

The automatic ice-cube maker



is loc-

ated in the ice-cube drawer



An ice-cube tray



, in which the ice

cubes are produced, is integrated in the
ice-cube maker



. This ice-cube tray

cannot be removed.

The ice-cube tray automatically empties
into the drawer as soon as ice cubes
are produced.

The ice-cube maker is switched on via
Settings mode



(see “Selecting fur-

ther settings” – Switching the ice-cube
maker



on and off”).

Содержание KWNS 28462 E ed/cs

























































































































Результаты поиска

Содержание KWNS 28462 E ed/cs

Отзывы:

Miele KWNS 28462 E ed/cs, Инструкции по эксплуатации и монтажу, Страница: 18 / 120

Результаты поиска

Содержание KWNS 28462 E ed/cs

Отзывы: