Miele KWNS 28462 E ed/cs Скачать руководство пользователя

Страница: 59 / 120

Cleaning and care

Cleaning the ice cube tray



Clean the ice cube tray

– before switching off the ice cube
maker for a long time.
– regularly, to remove ice and water
residues.

The ice cube tray

cannot be removed

and must be cleaned in situ. For this
reason the ice cube tray must be set to
the cleaning position.

Selecting the cleaning position



The ice cube maker has to be
switched on before the “Select clean-
ing position



” function can be selec-

ted.

The ice cube drawer must also be in
position.



Empty the ice cube drawer and place
it in the appliance.



Select the



symbol in Settings

mode



The selected setting is applied. You will
hear the ice cube tray turn so that it is
at an angle.



Wait until the ice cube tray has com-
pleted this rotation before continuing.

The



symbol will appear in the dis-

play.



Remove the ice cube drawer.



Clean the ice cube tray and the ice
cube drawer with lukewarm water
and a little washing up liquid. Wipe
thoroughly with clean water and dry
with a cloth.



Insert the ice cube drawer back into
the appliance.



After cleaning, confirm



with

You will hear the ice cube tray return to
its original position.

Содержание KWNS 28462 E ed/cs

























































































































Результаты поиска

Содержание KWNS 28462 E ed/cs

Отзывы:

Похожие инструкции для KWNS 28462 E ed/cs

Бренды по названию

Популярные бренды

Miele KWNS 28462 E ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KWNS 28462 E ed/cs

Отзывы:

Похожие инструкции для KWNS 28462 E ed/cs

Бренды по названию

Популярные бренды