Miele KMDA 7476 FL Скачать руководство пользователя

Страница: 62 / 100

Problem solving guide

Issue

Cause and remedy

After the hob has been
switched on, or after
touching a sensor,



appears in the timer
display for a few
seconds.

The system lock or safety lock is activated.



Deactivate the system lock or safety lock (see
“System lock / Safety lock”).

The hob has switched
off automatically. When
the element is switched
back on,



appears

above the On/Off
sensor control



One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.



Clean off any dirt and/or remove the object (see
“Safety features” – “Safety switch-off”).

After the hob has been
switched on,



appears

briefly in the timer
display. The cooking
zones do not heat up.

The hob is in demonstration mode.



Touch the 0 sensor control on any of the numerical
displays.



Then touch the



and



sensor controls at the

same time until



flashes alternately with



the timer display.

A cooking zone
switches off
automatically.

It has been operated for too long.



You can use the cooking zone again by switching
it back on (see “Safety switch-off”).

A cooking zone or the
whole hob switches off
automatically.

The overheating protection mechanism has been
activated.



See “Safety features”.

The Booster has
deactivated early
automatically.

The overheating protection mechanism has been
activated.



See “Safety features”.

The cooking zone is not
working in the usual
way on the power
setting selected.

The overheating protection mechanism has been
activated.



See “Safety features”.

Power level 9 is
automatically reduced if
you also set power
level 9 for the
connected cooking
zone.

Operating both zones at power level 9 exceeds the
permitted maximum power for the two zones.



Use a different cooking zone.

Содержание KMDA 7476 FL





































































































Результаты поиска

Содержание KMDA 7476 FL

Отзывы:

Похожие инструкции для KMDA 7476 FL

Бренды по названию

Популярные бренды

Miele KMDA 7476 FL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KMDA 7476 FL

Отзывы:

Похожие инструкции для KMDA 7476 FL

Бренды по названию

Популярные бренды