Miele KMDA 7476 FL Скачать руководство пользователя

Страница: 17 / 100

Warning and Safety instructions



If the cookware only partially covers a cooking or extended zone,

the handle could become very hot.
Always place cookware in the middle of a cooking or extended zone!



Only use the PowerFlex cooking area for rectangular or oval oven

dishes.



Deposits of grease and dirt will prevent the cooker hood from

working properly.
Do not use the cooker hood without the grease filters in place.
Otherwise cooking vapours will not be cleaned.



There is a risk of fire if cleaning is not carried out as described in

these operating instructions.



Do not cover the intake grille on the cooker hood when in use.



Do not place hot pans on the extraction grille of the cooker hood.

This will impair the function of the cooker hood and may damage the
extraction grille.



Liquids can damage the cooker hood if they get into it. Keep

liquids away from the cooker hood.



Light objects can be drawn into the cooker hood and impair its

operation. Do not place any light objects (e.g. paper towels) within
close proximity of the cooker hood.



The induction generators could be damaged or even destroyed if

you use an induction adapter plate for cookware. Do not use
induction adapter plates.

Содержание KMDA 7476 FL





































































































Результаты поиска

Содержание KMDA 7476 FL

Отзывы:

Похожие инструкции для KMDA 7476 FL

Бренды по названию

Популярные бренды

Miele KMDA 7476 FL, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KMDA 7476 FL

Отзывы:

Похожие инструкции для KMDA 7476 FL

Бренды по названию

Популярные бренды