manualshive.com logo in svg

Miele KM 611 Series, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KM 611 Series Скачать руководство пользователя страница 10

Warning and Safety instructions

10

 

In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the warranty.

 

Do not modify this appliance.

Correct use

 

The cooktop gets hot when in use and remains hot for a while

after being switched off. There is a danger of burning until the
residual heat indicators go out.

 

Due to the high temperatures radiated, objects left near the

cooktop when it is in use could catch fire. 
Do not use the cooktop to heat up the room.

 

Oil and fat can overheat and catch fire. Do not leave the cooktop

unattended when cooking with oil and fat. If it does ignite, do not
attempt to put the flames out with water.
Disconnect the cooktop from the mains and use a suitable fire
blanket, saucepan lid, damp towel or similar to smother the flames.

 

Flames could set the grease filters of a rangehood on fire. Do not

flambé under a rangehood.

 

Spray canisters, aerosols and other inflammable substances can

ignite when heated. Therefore do not store such items or substances
in a drawer under the cooktop. Cutlery inserts must be heat-
resistant.

 

Do not heat an empty pan.

 

Do not heat up food in closed containers e.g. tins or sealed jars

on the cooktop, as pressure can build up in the container, causing it
to explode.

 

Do not cover the cooktop, e.g. with a cooktop cover, a cloth or

protective foil. The material could catch fire, shatter or melt if the
cooktop is switched on by mistake or if residual heat is still present.

Содержание KM 611 Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды