Miele KM 611 Series Скачать руководство пользователя | Manualshive

Страница: 37 / 60

background image

Safety features

37

Overheating protection

All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
or cooling elements get too hot, the
overheating protection mechanism cuts
in in one of the following ways:

Induction coils

– Any Booster function in operation will

be switched off.

– The set power level will be reduced.

– The cooking zone will switch off

automatically. The fault code



will appear.

You can use the cooking zones again as
usual when the fault message has gone
out.

Cooling elements

– Any Booster function in operation will

be switched off.

– The set power level will be reduced.

– The cooking zones switch off

automatically.

The affected cooking zones can only be
used again as usual once the cooling
element has cooled down to a safe
level.

The overheating protection mechanism
can be triggered by:

– Heating up an empty pan.

– Fat or oil being heated on a high

power setting.

– Insufficient ventilation to the

underside of the cooktop.

– A hot cooking zone being switched

on after an interruption to the power
supply.

If, despite removing the cause, the
overheating protection mechanism
triggers again, contact Miele.

Control panel

The control panel electronic unit is
equipped with an overheating
protection mechanism. This switches
off the cooktop automatically before the
electronic unit overheats.

The fault code



will appear if the

control panel overheating protection
mechanism is triggered. You can use
the cooktop again once the fault code
has gone out.

The overheating protection mechanism
can be switched on if more than one
cooking zone is operated on a high
setting for a long period of time.

«
...
35
36
37
38
39
...
»

Содержание KM 611 Series





























































Отзывы:

Нет отзывов

Похожие инструкции для KM 611 Series

Бренд: M-system Страницы: 120

Бренд: Jenn-Air Страницы: 28

Бренд: Bartscher Страницы: 71

COOKINGPLATES1111CH

Бренд: Rotel Страницы: 17

Бренд: FG Europe Страницы: 23

Бренд: GGMgastro Страницы: 10

Бренд: M-system Страницы: 60

Бренд: Jata hogar Страницы: 20

Бренд: Frigidaire Страницы: 40

Бренд: GE Страницы: 16

Бренд: GE Страницы: 2

JP346BMBB - 30" Smoothtop Electric Cooktop

Бренд: GE Страницы: 2

Бренд: GE Страницы: 16

Бренд: GE Страницы: 40

Бренд: GE Страницы: 20

Бренд: GE Страницы: 16

Бренд: GE Страницы: 16

Бренд: GE Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды