background image

Cleaning and care

38

Danger of burning!

The cooking zones must be switched
off. The cooktop needs to cool
down.

Danger of injury!

The steam from a steam cleaning
appliance could reach electrical
components and cause a short
circuit.
Do not use a steam cleaner to clean
the cooktop.

The use of unsuitable cleaning
agents can cause the surfaces to
discolour or alter.
The external surfaces of this
appliance are all susceptible to
scratching.
Remove any cleaning agent residues
immediately.

Clean the entire cooktop after each use.
Allow it to cool down before cleaning.
Dry the appliance after using water to
clean it. This helps prevent lime
deposits.

Unsuitable cleaning agents

To avoid damaging the surfaces of your
appliance, do not use:

– washing-up liquid,

– cleaning agents containing soda,

alkalines, ammonia, acids or
chlorides,

– cleaning agents containing descaling

agents,

– stain or rust removers,

– abrasive cleaning agents, e.g.

powder cleaners and cream cleaners,

– solvent-based cleaning agents,

– dishwasher cleaner,

– grill and oven cleaners,

– glass cleaning agents,

– hard, abrasive brushes or sponges,

e.g. pot scourers, or sponges which
have been previously used with
abrasive cleaning agents,

– dirt erasers.

Содержание KM 611 Series





























































Отзывы: