Miele KM 520, Инструкции по эксплуатации и монтажу

Страница: 27 / 48

You can test the power level of a
cooking zone by measuring how long it
takes to bring a specific amount of
water to the boil.
The pan (and lid) must be stainless
steel or enamel. The diameter of the
pan must match the cooking zone, and
be flat-bottomed or slightly concave.
^
Take a note of the diameter and
wattage of the cooking zone to be
tested (see "Guide to the appliance -
Cooking zones").
^
Fill the pan with the quantity of water
given in the table.
^
Place the pan with its lid on the
cooking zone.
^
Switch on the cooking zone at the
highest setting.
^
Note the time it takes for the water to
boil.
The power level for the cooking zone is
fine if the water boils within the time
given in the table.
The time can vary if:
- there is low or excess voltage
- very cold water is used
- an unsuitable pan is used
- the pan is not covered.
To test the power level
27