Switching on and off
Do not leave the appliance
unattended whilst it is being used.
Controls on cooking zones
without
extended areas
can be turned through
360°. These cooking zones are
switched on by turning the
corresponding control clockwise or
anti-clockwise to the required setting,
and they are switched off by turning the
control clockwise or anti-clockwise
back to "0".
Controls on cooking zones
with
extended areas
have a resistance on
them. These cooking zones are
switched on by turning the appropriate
control clockwise to the required
setting, and they are switched off by
turning the control anti-clockwise back
to "0".
Do not force the control past the
point of resistance to "0" as this will
damage it.
Residual heat indicator
When a cooking zone is switched on,
e.g. front left, the appropriate residual
heat indicator lights up in the display
when the zone has reached a certain
temperature.
The residual heat indicator will switch
off after the cooking zone has been
switched off once the temperature has
dropped to a safe level.
Do not touch the cooking zones or
place any heat-sensitive items on
them whilst they are still hot.
Danger of burning, and fire hazard.
Operation
18
Содержание KM 520
