![background image](http://html.mh-extra.com/html/miele/km-402/km-402_operating-instructions-manual_235590013.webp)
Cleaning and heating up for
the first time
Before using the fryer for the first time,
clean it as follows:
^
Fill the oil reservoir with approx. 4
litres of water and add a little wash-
ing up liquid. Ensure that the water
level is not higher than the maximum
level indicator which is marked on the
rear of the reservoir.
^
Turn the control in a clockwise direc-
tion to 130 °C and bring the water to
the boil.
^
When the water has started to boil,
switch off the fryer by turning the
control back anti-clockwise to "0".
Empty the water through the drain
tap into a heat resistant container.
(see section on "After frying").
^
Rinse the oil reservoir out with hot
water.
^
Close the drain tap, raise the heating
element and dry the reservoir with a
clean cloth.
^
Clean all other appliance surfaces
with a damp cloth only, and then wipe
dry.
Metal components have a protective
coating which may give off a slight
smell when the appliance is heated up
for the first time. The smell and any va-
pours will dissipate after a short time
and do not indicate a faulty connection
or appliance.
Before using for the first time
13
Содержание KM 402
Страница 4: ...or without a plug The plug shown is for illustration only Description of the appliance 4 ...
Страница 27: ...27 ...