Installation
*INSTALLATION*
49
Gas pressure regulator
The cooktop is supplied together with a
gas pressure regulator that can be con-
verted from natural gas to liquid
propane or from liquid propane to natu-
ral gas. The regulator is supplied config-
ured for the type of gas to which the
cooktop is designed to be connected.
Check this prior to installation.
Pressure setting:
Natural gas 4" w.c.
Liquid propane 1'" w.c.
a
Cooktop
b
½" NPT gas connection
c
Regulator
The regulator must be installed as
shown in the diagram when you con-
nect the Miele Cooktop to your gas
connection. The regulator has been
adapted by Miele to meet all statutory
safety requirements. The regulator must
be easily accessible after the cooktop
has been installed.
A flexible steel hose approved by the
AGA or CGA can be used between the
gas connection and the regulator. This
flexible hose enables the cooktop to be
lifted out of the cut-out for maintenance
or repair work. Check to make sure that
no drawers, doors, or similar come into
contact with this flexible hose.
Gas leak due to unsuitable regulator.
Only use the regulator supplied by
Miele.
If you are in any doubt, contact Miele
Customer Service.
Leakage test
After connecting the appliance check
all fittings for gas leaks e.g. with
soapy water.