Before using for the first time
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator and freezer sections
are switched on together with the
master dial on the right hand side of the
control panel.
^
Using a coin turn the master On/Off
dial in a clockwise direction away
from the "0" position.
Forcing it beyond its range will
damage it. Turn it only as far as it
will go, then turn it back again.
The temperature display for the
refrigerator section will light up and the
interior lighting will come on when door
is opened.
The temperature display for the freezer
section will light up. The alarm indicator
light will also light up. It will go out when
the temperature in the freezer is cold
enough.
The appliance will start cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top drawer
or, to save space, on the freezer tray.
The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^
Using a coin turn the On/Off master
dial in an anti-clockwise direction
back to the "0" position.
The temperature displays will go out out
and the cooling process is switched off.
To switch the refrigerator section off
separately
The refrigerator section can be
switched off without having to switch off
the freezer section. This is useful e.g.
whilst on holiday.
^
Using a coin turn the On/Off dial for
the refrigerator section in an
anti-clockwise direction back to the
"0" position.
The temperature display for the
refrigerator section will go out and the
refrigerator section will switch off.
Switching on and off
14
