The appliance is supplied right-hand
hinged. If left hand door hinging is
required, follow the instructions below.
Removing the door handles:
First the side sections of the handles
must be removed:
^
Pull door handle
a
towards you. Side
section
b
slides back, creating a
gap
d
between side section
b
and
mounting plate
c
.
^
Place a suitable object (e.g. a spoon
handle) in gap
d
, and slowly lever
the handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
The side section
b
can now be
removed.
^
Pull side section
b
out of the guides
on the mounting plate.
^
Loosen the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^
Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Changing over the doors:
^
Open the lower door.
^
Use a screwdriver to lever plinth
a
out, then pull it forwards and out.
^
Use a screwdriver to remove cover
b
, then close the door.
^
Remove screw
c
completely.
^
Pull door support
d
together with
hinge pin
e
downwards, then tilt it
forwards and take it off.
^
Open the lower appliance door,
move it downwards and take it off.
^
With the upper door
g
closed, pull
hinge pin
f
downwards to remove it.
Changing the door hinging
39