Miele KFN 37682 iD Скачать руководство пользователя страница 63

Страница: 63 / 104

Problem solving guide

Display warnings

Problem

Cause and remedy

The mains connection

symbol

,

appears and

the alarm sounds.

The temperature dis‐

play will also show the

warmest temperature

recorded in the freezer

during an interruption

to the power supply or

a power cut.

The temperature in the appliance in the previous days

or hours has risen too high because of a power cut or

interruption to the power supply.

The appliance will go back to the last temperature

setting when the power is back on.



Touch the alarm off sensor.

The warmest temperature display will go out. The dis‐

play will then revert to showing the current tempera‐

ture in the freezer.



Depending on the temperature displayed, you

should check the condition of food in the freezer. If

it has defrosted or started to defrost, check that it

is still safe to use and, if so, use it as soon as pos‐

sible. Defrosted food may only be re-frozen after it

has been cooked.

Содержание KFN 37682 iD









































































































Результаты поиска

Содержание KFN 37682 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele KFN 37682 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37682 iD

Отзывы:

Бренды по названию

Популярные бренды