manualshive.com logo in svg

Miele KFN 37682 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 37682 iD Скачать руководство пользователя страница 14

How to save energy

14

Normal energy consump‐

tion

Increased energy con‐

sumption

Use

Drawers and shelves ar‐

ranged as they were when

the appliance was delivered.
Only open the door when

necessary and for as short a

time as possible. Store food

in an organised way.

Frequent opening of the

door for long periods will

cause a loss of coldness.

The appliance works harder

to cool down and the com‐

pressor runs for longer peri‐

ods.

Take an insulated cool bag

when shopping and load

food in the appliance as

soon as possible.

Replace any food removed

as quickly as possible, be‐

fore it begins to thaw.

Allow hot food and drinks to

cool down before placing

them in the appliance.

Hot food or food at room

temperature raises the tem‐

perature inside the appli‐

ance. The appliance works

harder to cool down and the

compressor runs for longer

periods.

Store food covered or pack‐

aged.

The evaporation or conden‐

sation of liquids will cause a

loss of coldness.

Place frozen food in the re‐

frigerator to defrost.
Do not over-fill the appliance

to allow air to circulate.

Содержание KFN 37682 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды