manualshive.com logo in svg

Miele KFN 37682 iD, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 37682 iD Скачать руководство пользователя страница 61

Problem solving guide

61

Problem

Cause and remedy

The compressor is

switching on more fre‐

quently and for longer

periods of time, so the

temperature in the ap‐

pliance is dropping.

The temperature setting is too low.

 

Adjust the temperature.

A large amount of food is being frozen at once.

 

See "Freezing and storing food".

The Super cool function is still switched on.

 

You can switch off the Super cool function earlier

to save energy.

The Super freeze function is still switched on.

 

You can switch off the Super freeze function earli‐

er to save energy.

The compressor comes

on less and less often

and for shorter periods

of time. The tempera‐

ture in the appliance

rises.

This is not a fault. The set temperature is too high.

 

Adjust the temperature.

 

Check the temperature again after 24 hours.

The food begins to defrost. 

The room temperature is lower than the ambient tem‐

perature for which the appliance is designed.

Operating in a room which is too cold will cause the

compressor to switch off for too long, causing the

freezer to become too warm.

 

See "Installation - Location".

 

Increase the temperature of the room.

An LED indicator light is

flashing at the back of

the appliance at the

bottom near the com‐

pressor (depending on

model).

This is not a fault. The electronic unit for the com‐

pressor is equipped with an operation and fault diag‐

nosis LED indicator light which flashes every 15 sec‐

onds (depending on model).

Содержание KFN 37682 iD









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды