Miele KFN 37682 iD Скачать руководство пользователя страница 44

Страница: 44 / 104

Adjusting the interior fittings

Adjusting the bottle rack

The bottle rack can be placed at differ‐

ent positions in the appliance.



Raise the bottle rack slightly at the

front, and pull it forwards a little until

the notch at the side is in line with the

shelf support. It can then be raised or

lowered to the required level.

The rear rail must face upwards to pre‐

vent bottles from touching the back of

the appliance.
Stoppers prevent the bottle rack from

being dislodged by mistake.

PerfectFresh Pro zone com‐

partments

The compartments in the PerfectFresh

Pro zone are on telescopic runners, and

can be removed for filling, emptying or

cleaning purposes.

Remove the bottle shelf from the door

to make it easier to take out the com‐

partments.



Pull the drawer out as far as it will go.



Holding the sides of the compart‐

ment at the back, lift it up and then

forwards and out.

Push the runners back in again to

avoid damaging them.



Carefully pull out the lid between the

compartments slightly, and lift it

down and out.

Содержание KFN 37682 iD









































































































Результаты поиска

Содержание KFN 37682 iD

Отзывы:

Бренды по названию

Популярные бренды

Miele KFN 37682 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 37682 iD

Отзывы:

Бренды по названию

Популярные бренды