Miele KFN 13923 DE страница 47 Скачать руководство пользователя

Страница: 47 / 96

Making ice cubes

Turning off the ice cube maker

The ice cube maker can be turned off
independently of the freezer section if
you do not want to make any ice cubes.

Tip:

If the ice cube maker is turned off,

the ice cube drawer can be used as an
extra drawer for freezing fresh food and
storing frozen food.



Touch the



sensor button for turn-

ing the ice cube maker on and off so
that the



display LED goes out.

If the Ice Maker is going to be turned
off for a long period of time



Risk of damage!

If the water intake is blocked while
the Ice Maker is still in use, the water
intake pipe can freeze up.
Turn the Ice Maker off if the water in-
take is interrupted (e.g., while on va-
cation).



Close the non-return valve in the wa-
ter supply line.

If the



display LED begins to flash,

this means that there is still water re-
maining in the Ice Maker.



Leave the Ice Maker turned on for an-
other day so that the remaining ice
cubes can be produced.



As soon as the remaining ice cubes
have been produced, touch the



sensor button for turning the Ice

Maker on and off so that the



dis-

play LED for the Ice Maker goes out.



Take the remaining ice cubes out of
the ice cube container and dispose of
them.

Содержание KFN 13923 DE

































































































Результаты поиска

Содержание KFN 13923 DE

Отзывы:

Похожие инструкции для KFN 13923 DE

Бренды по названию

Популярные бренды

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 13923 DE

Отзывы:

Похожие инструкции для KFN 13923 DE

Бренды по названию

Популярные бренды