manualshive.com logo in svg

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 13923 DE Скачать руководство пользователя страница 59

Frequently Asked Questions

59

Message

Possible cause and solution

The 

 display LED is lit

up and an alarm is also
sounding.

The 

temperature alarm

 has been activated (see also

“Temperature and door alarm”). The temperature in
the freezer section has risen above or fallen below
the temperature set.
This could be due to, e.g.:

– the freezer section door being opened too often or

being left open

– a large quantity of fresh food being placed in the

freezer at once without the SuperFrost function be-
ing turned on

– a power failure having occurred

– the machine having a fault

Rectify the cause of the alarm.

The 

 display LED goes out and the alarm is silenced.

The temperature display will stop flashing as soon as
the temperature has dropped to the correct level.

Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.

Содержание KFN 13923 DE

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды