manualshive.com logo in svg

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 13923 DE Скачать руководство пользователя страница 6

IMPORTANT SAFETY INSTRUCTIONS

6

 

This appliance is not suitable for storing and keeping cool

medicines, blood plasma, laboratory preparations or other such ma-
terials or products. Incorrect use of the appliance for such purposes
can cause deterioration of the items stored. The appliance is not
suitable for use in areas where there is a risk of explosion.
Miele cannot be held liable for damage resulting from improper or in-
correct use of the appliance.

 

Persons (including children) which lack physical, sensory or men-

tal abilities or experience with the machine should not use it without
supervision or instruction by a responsible person.

Safety with children

 

To reduce the risk of injury, do not allow children to play in, on or

near the appliance.

 

Ensure that any packing material is disposed of safely and kept

out of the reach of children. DANGER of suffocation!

Содержание KFN 13923 DE

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды