. . . the super freeze or super cool in-
dicator light is not lit up although the
appliance is working.
The indicator light is defective. Call the
Miele Service Department.
. . . the appliance will not switch off or
the temperature cannot be adjusted.
The safety lock has been activated.
. . . the interior light in the refrigerator
section is not working.
^
Was the refrigerator section door left
open for too long? The lighting
switches itself off automatically after
approx. 15 minutes.
If this is not the case, then the bulb is
defective:
^
Disconnect the appliance from the
mains. Switch off at the wall and with-
draw the plug from the socket (pull
by the plug not the cable), or discon-
nect the mains fuse or remove the
screw-out fuse in countries where this
is applicable.
^
Press the sides of the lamp cover in-
wards, disengage the cover and
unclip it at the rear.
^
Unscrew the bulb and replace it with
a new one.
Bulb specification:
220 – 240 V, max. 25 W, E 14 fitting
^
Screw the new bulb into the connec-
tion. Ensure it goes in correctly.
^
Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
. . . the floor of the refrigerator sec-
tion is wet.
The drain hole is blocked.
^
Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
then contact the Miele Service De-
partment.
To prevent unecessary loss of tem-
perature it is advisable not to open
the doors while waiting for the appli-
ance to be serviced.
Problem solving guide
32