When pressing the buttons the follow-
ing are shown in the display:
– When first pressed: The
last
temperature selected
flashes.
– Each subsequent press of the but-
ton:
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in: ad-
justs the temperature continually.
Approx. 5 seconds after letting go of
the button the current
actual
tempera-
ture of the refrigerator or freezer is auto-
matically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the appli-
ance is not very full
and
for approx.
24 hours if the appliance is full
before
checking the temperature display as it
will take this long for the display to
show the accurate temperature of the
appliance. If, after this time, the temper-
ature is too high or too low, you will
need to adjust it again.
Temperature range
The temperature can be adjusted:
– in the refrigerator section from 2 °C
to 11 °C
– in the freezer section from -16 °C to
-26 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperture. If the am-
bient temperature is too high, the appli-
ance may not reach the lowest temper-
ature.
Temperature displays
During normal operation the tempera-
ture display shows the temperature in
the middle of the refrigerator section
and the temperature in the warmest
part of the freezer section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator sec-
tion, and if the temperature in the
freezer section is above 0 °C), only a
bar will light up in the temperature dis-
plays.
It will take between 3 and 8 hours ap-
proximately for the appliance to reach
the required temperature. The time it
takes will depend on where the appli-
ance is located and the temperature
setting selected.
The correct temperature
14
