The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow the instructions below.
^
Open the lower appliance door.
^
Use a screwdriver to lever the plinth
fascia
a
out, then pull it forwards
and off.
^
Use a screwdriver to remove cover
b
, then close the door.
^
Remove screw
c
completely.
^
Pull door support
d
together with
hinge pin
e
downwards, then tilt it
forwards and take it off.
^
Open the lower appliance door, move
it downwards and take it off.
^
With the upper door
g
closed, pull
hinge pin
f
downwards to remove it.
^
Open the upper door, and pull it
downwards and off. Take care not to
lose the washers
b
.
^
Unscrew upper hinge pin
a
using
the spanner supplied and refit on the
opposite side.
^
Exchange cover
g
in the middle of
the appliance with hinge bracket
d
.
To do this:
Undo screws
h
, pull cover
g
and
hinge bracket
d
off to the side, turn
around and refit into position on the
opposite side.
^
Pull bearing bush
c
downwards out
of hinge bracket
d
and refit it from
above into the hinge bracket.
^
Remove spacer
f
with a screwdriver
and refit it on the opposite side.
^
Remove plugs
i
from door bearing
bushes in the doors and refit on the
opposite side.
Changing the door hinging
37
