^
Secure the connection cable sup-
plied
d
to the temperature regulator
c
.
^
Fit the temperature regulator in the
opening provided in the vent duct.
^
Use the coil spring to secure the vent
duct together with the temperature
regulator.
Finally, the electrical connectors must
be fitted to the catalyser.
^
Connection cable
d
: secure to one
end of catalyser heater element
a
.
The other two connection cables used
to connect the catalyser are located in
their storage position beside the vent
duct.
^
Connect cables 1 and 2 to the tem-
perature regulator and to the remain-
ing free catalyser heater element
end.
Secure the cable to the temperature
regulator with the angled connector.
Service engineer fitting instructions
77