Miele K 35222 iD Скачать руководство пользователя | Manualshive

Страница: 10 / 68

background image

~

Danger of suffocation. Packaging, e.g. plastic wrappings, must

be kept out of the reach of babies and children. Whilst playing,
children could become entangled in packaging or pull it over their
head and suffocate.

Technical safety

~

The coolant system is tested for leaks. The appliance complies

with statutory safety requirements and the appropriate EU
guidelines.

~

This appliance contains the coolant Isobutane (R600a), a natural

gas which is environmentally friendly. Although it is flammable, it
does not damage the ozone layer and does not increase the
greenhouse effect. The use of this coolant has, however, led to a
slight increase in the noise level of the appliance. In addition to the
noise of the compressor, you might be able to hear the coolant
flowing around the system. This is unavoidable, and does not have
any adverse effect on the performance of the appliance.
Care must be taken during the transportation and installation of the
appliance that no parts of the cooling system are damaged. Leaking
refrigerant can damage the eyes.
In the event of any damage:

– avoid any flames or anything which creates a spark,

– disconnect the appliance from the electricity supply,

– ventilate the room where the appliance is located for several

minutes, and

– call the Service Department.

Warning and Safety instructions

10

«
...
8
9
10
11
12
...
»

Содержание K 35222 iD





































































Отзывы:

Нет отзывов

Похожие инструкции для K 35222 iD

Performa MBF1956HEB

Бренд: Maytag Страницы: 32

Бренд: Jenn-Air Страницы: 104

Бренд: IFB Страницы: 8

randell 4337DWR-290

Бренд: Unified Brands Страницы: 19

Бренд: Hoshizaki Страницы: 29

Бренд: Oursson Страницы: 28

Бренд: NABO Страницы: 39

Бренд: Haier Страницы: 12

Бренд: Haier Страницы: 22

Бренд: Haier Страницы: 10

Бренд: Samsung Страницы: 64

Бренд: Samsung Страницы: 60

Бренд: Samsung Страницы: 60

Бренд: Danby Страницы: 32

Бренд: Indesit Страницы: 48

Бренд: Curtis Страницы: 6

Бренд: Beko Страницы: 24

Бренд: Beko Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды