Miele K 35222 iD страница 18 Скачать руководство пользователя

Страница: 18 / 68

Before using for the first time

Protective foil

The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.

Carefully remove the protective foil
from the stainless steel trim.

Cleaning

Clean the inside of the appliance and
the accessories. See "Cleaning and
care" for more information.

Accessory - Bottle holder

Attach the bottle holder centrally
along the rear edge of the bottle
shelf, as shown.

The flexible ribs grip the bottles
securely when the door is opened and
closed.

Switching on

Press the On/Off button.

The temperature display lights up, the
appliance starts cooling and the interior
light will come on when the door is
opened.

To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.

Switching off

Press the On/Off button until the
display goes out.

The cooling system is switched off. If
this does not happen, the safety lock is
still activated (see "Selecting settings -
To deactivate the lock").

Switching on and off

Содержание K 35222 iD





































































Результаты поиска

Содержание K 35222 iD

Отзывы:

Похожие инструкции для K 35222 iD

Бренды по названию

Популярные бренды

Miele K 35222 iD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 35222 iD

Отзывы:

Похожие инструкции для K 35222 iD

Бренды по названию

Популярные бренды