Miele K 2601 V Скачать руководство пользователя страница 97

Страница: 97 / 108

Problem solving guide

Issue

Cause and remedy

The compressor is
switching on more
frequently and for
longer periods of time.
The temperature in the
refrigeration appliance
is too low.

The ventilation gaps in the housing unit have been
covered or become too dusty.



Do not block the ventilation gaps.



Dust the ventilation gaps regularly.

The appliance door has been opened too frequently
or a large amount of food has been put in at once.



Only open the door when necessary and for as
short a time as possible.

After a while, the temperature will return to normal by
itself.

The appliance door is not properly closed.



Close the door.

After a while, the temperature will return to normal by
itself.

The ambient room temperature is too high. The
higher the ambient temperature, the longer the
compressor has to run.



See the information in “Installation” – “Location”.

The refrigeration appliance was not properly installed
in the niche.



See the information in “Installation” – “Installing
the refrigeration appliance”.

The compressor is
switching on more
frequently and for
longer periods of time,
so the temperature in
the appliance is
dropping.

The temperature setting is too low.



Adjust the temperature.

The Super cool function is still switched on.



You can switch off the Super cool function earlier
to save energy.

The compressor comes
on less and less often
and for shorter periods
of time.

This is not a fault. The temperature is too high.



Adjust the temperature.



Check the temperature again after 24 hours.

The compressor runs
continuously.

This is not a fault. To save energy, the compressor
runs at a lower speed, but for longer, when less
cooling is required.

Содержание K 2601 V













































































































Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды

Miele K 2601 V, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды