Miele K 2601 V Скачать руководство пользователя страница 61

Страница: 61 / 108

Switching on and off

Switching the refrigeration
appliance on



Open the appliance door.



Switch the refrigeration appliance on
by pressing the On/Off switch.

The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.

Miele

will appear, followed by the main

screen on the refrigeration appliance
display:

°C











To enable the temperature to get
sufficiently cold inside the
refrigeration appliance, allow it to run
for a few hours before placing food
in it.

Switching off the refrigeration
appliance



Switch the refrigeration appliance off
by pressing the On/Off switch.

The cooling and interior lighting are
switched off.

Please note: the refrigeration
appliance is not disconnected from
the power supply when it is switched
off with the On/Off switch.

Switching off for longer
periods of time

If the refrigeration appliance is not
going to be used for a longer period of
time:



Switch the refrigeration appliance off.



Switch off at the wall socket and
withdraw the plug from the socket, or
disconnect the fuse.



Clean the refrigeration appliance.



Leave the door ajar to air the
refrigeration appliance and prevent
odours from building up inside it.

If, during a long absence, the
refrigeration appliance is switched off
but not cleaned and the door(s) left
shut, there is a risk of mould forming
inside the appliance.
It is essential to clean the
refrigeration appliance.

Содержание K 2601 V













































































































Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды

Miele K 2601 V, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды